---
title: "Frigidaire-built Kenmore range signal Dash"
description: "Frigidaire-built Kenmore range signal Dash — dash is an indicator rather than an error."
url: "https://kenmoremiami.support/error-codes/frigidaire-range-dash/"
date_modified: "2026-09-01"
Appliance type: "Cooktops, Ranges"
---


# Frigidaire-built Kenmore range signal Dash

### Whose code this actually is

Kenmore did not write Dash, because Kenmore has never built an appliance. This one is Frigidaire’s, and it appears on the range that Frigidaire built and Sears sold under the Kenmore badge. Ranges under this badge came from Frigidaire, GE and Roper, and one of those three publishes no code documentation at all — so even knowing a range is not enough. The prefix is.

### What the appliance is telling you

A dash in the display means the cooktop is locked. Frigidaire's own instruction is to press OFF and hold for six seconds.

This one is an indicator rather than an error. It is published in the same table as genuine problems, and treating it as one is how a working appliance gets a service call.

### Which Kenmore models can raise it

The Kenmore range whose model number begins 790 — the three digits before the period on the rating plate. Those digits are Frigidaire’s, which is why Frigidaire’s table is the one that applies to Dash and no other manufacturer’s does.

### The other ways it may be written

The same condition is published under more than one label, because it has been carried across generations of the appliance and because a segment display draws some characters oddly: **–, –**. They are the same finding and they lead to the same place.

### Worth trying yourself, in this order

- Press OFF and hold for six seconds.
- This is a setting and not a problem, and it accounts for a real share of dead-cooktop calls.

### Where this usually goes

The job this most often becomes is [oven door lock repair](/services/oven-door-lock-repair/), and that page carries a starting figure and the reasons that move it. A Kenmore range in a South Florida kitchen is usually freestanding rather than built in, which keeps the access short and means most of these end in one visit. Photograph the display before you cut the power: a reset clears Dash, and on a Kenmore the characters plus three digits off the plate are most of the diagnosis.

### Where this meaning came from

Frigidaire’s own documentation: *Ranges — Error Code Guide, Frigidaire owner support*. Kenmore publishes none of its own, which is why every entry on this site names the manufacturer’s document instead.

What the machine is telling you

Whose code this actually is

Kenmore did not write Dash, because Kenmore has never built an appliance. This one is Frigidaire’s, and it appears on the range that Frigidaire built and Sears sold under the Kenmore badge. Ranges under this badge came from Frigidaire, GE and Roper, and one of those three publishes no code documentation at all — so even knowing a range is not enough. The prefix is.

What the appliance is telling you

A dash in the display means the cooktop is locked. Frigidaire's own instruction is to press OFF and hold for six seconds.

This one is an indicator rather than an error. It is published in the same table as genuine problems, and treating it as one is how a working appliance gets a service call.

Which Kenmore models can raise it

The Kenmore range whose model number begins 790 — the three digits before the period on the rating plate. Those digits are Frigidaire’s, which is why Frigidaire’s table is the one that applies to Dash and no other manufacturer’s does.

The other ways it may be written

The same condition is published under more than one label, because it has been carried across generations of the appliance and because a segment display draws some characters oddly: –, –. They are the same finding and they lead to the same place.

Worth trying yourself, in this order

Press OFF and hold for six seconds.

This is a setting and not a problem, and it accounts for a real share of dead-cooktop calls.

Where this usually goes

The job this most often becomes is oven door lock repair, and that page carries a starting figure and the reasons that move it. A Kenmore range in a South Florida kitchen is usually freestanding rather than built in, which keeps the access short and means most of these end in one visit. Photograph the display before you cut the power: a reset clears Dash, and on a Kenmore the characters plus three digits off the plate are most of the diagnosis.

Where this meaning came from

Frigidaire’s own documentation: Ranges — Error Code Guide, Frigidaire owner support. Kenmore publishes none of its own, which is why every entry on this site names the manufacturer’s document instead.

---

**[Read full article: Frigidaire-built Kenmore range signal Dash](https://kenmoremiami.support/error-codes/frigidaire-range-dash/)**