---
title: "LG-built Kenmore washer error code LE1"
description: "LG-built Kenmore washer error code LE1: lG wrote this code, not Kenmore. On a washer wearing this badge, LE1 means: LG's own label is FOREIGN OBJECT ERROR on…"
url: "https://kenmoremiami.support/error-codes/lg-washer-le1/"
date_modified: "2026-09-01"
Appliance type: "Washers"
---


# LG-built Kenmore washer error code LE1

### Whose code this actually is

Kenmore did not write LE1, because Kenmore has never built an appliance. This one is LG’s, and it appears on the washer that LG built and Sears sold under the Kenmore badge. Whirlpool-built and LG-built washers wear one badge and share almost none of their code scheme, so the wrong table here sends you to a pump when the machine is reporting a lid.

### What it means

LG's own label is FOREIGN OBJECT ERROR on a top-loader — something is in the machine that should not be.

### Which Kenmore models can raise it

The Kenmore washer whose model number begins 796 — the three digits before the period on the rating plate. Those digits are LG’s, which is why LG’s table is the one that applies to LE1 and no other manufacturer’s does.

### What happens next

- Check between the drum and the tub, and the pump filter.
- Coins and underwires are the classics.

### Where this usually goes

The job this most often becomes is [diagnostic visit](/services/diagnostic-visit/), and that page carries a starting figure and the reasons that move it. A Kenmore washer in this county works in hard water and a warm laundry room, so a code that arrives with slow draining or long cycles is very often the supply or the drain rather than the machine. Photograph the display before you cut the power: a reset clears LE1, and on a Kenmore the characters plus three digits off the plate are most of the diagnosis.

### Where this meaning came from

LG’s own documentation: *LG Owner's Manual — Washing Machine, Top Loader, USA/Canada, P/No. MFL68267085*. Kenmore publishes none of its own, which is why every entry on this site names the manufacturer’s document instead.

What this one means

Whose code this actually is

Kenmore did not write LE1, because Kenmore has never built an appliance. This one is LG’s, and it appears on the washer that LG built and Sears sold under the Kenmore badge. Whirlpool-built and LG-built washers wear one badge and share almost none of their code scheme, so the wrong table here sends you to a pump when the machine is reporting a lid.

What it means

LG's own label is FOREIGN OBJECT ERROR on a top-loader — something is in the machine that should not be.

Which Kenmore models can raise it

The Kenmore washer whose model number begins 796 — the three digits before the period on the rating plate. Those digits are LG’s, which is why LG’s table is the one that applies to LE1 and no other manufacturer’s does.

What happens next

Check between the drum and the tub, and the pump filter.

Coins and underwires are the classics.

Where this usually goes

The job this most often becomes is diagnostic visit, and that page carries a starting figure and the reasons that move it. A Kenmore washer in this county works in hard water and a warm laundry room, so a code that arrives with slow draining or long cycles is very often the supply or the drain rather than the machine. Photograph the display before you cut the power: a reset clears LE1, and on a Kenmore the characters plus three digits off the plate are most of the diagnosis.

Where this meaning came from

LG’s own documentation: LG Owner's Manual — Washing Machine, Top Loader, USA/Canada, P/No. MFL68267085. Kenmore publishes none of its own, which is why every entry on this site names the manufacturer’s document instead.

---

**[Read full article: LG-built Kenmore washer error code LE1](https://kenmoremiami.support/error-codes/lg-washer-le1/)**