---
title: "Whirlpool-built Kenmore dryer error code ERR"
description: "Whirlpool-built Kenmore dryer error code ERR — whirlpool wrote this code, not Kenmore."
url: "https://kenmoremiami.support/error-codes/whirlpool-dryer-err/"
date_modified: "2026-09-01"
Appliance type: "Dryers"
---


# Whirlpool-built Kenmore dryer error code ERR

### Whose code this actually is

Kenmore did not write ERR, because Kenmore has never built an appliance. This one is Whirlpool’s, and it appears on the dryer that Whirlpool built and Sears sold under the Kenmore badge. Whirlpool, LG and Frigidaire all built dryers for this badge, and all three publish short two-character codes, so a lookup that skips the prefix is a coin toss dressed as an answer.

### What it means

Whirlpool's wording: the door has not been completely closed and latched, and the dryer will not run until it is.

### Which Kenmore models can raise it

The Kenmore dryer whose model number begins 110 — the three digits before the period on the rating plate. Those digits are Whirlpool’s, which is why Whirlpool’s table is the one that applies to ERR and no other manufacturer’s does.

### Worth trying yourself, in this order

- Close the door firmly.
- A door that has to be slammed is a catch or a hinge, and it is a small repair.

### Where this usually goes

The job this most often becomes is [diagnostic visit](/services/diagnostic-visit/), and that page carries a starting figure and the reasons that move it. A Kenmore dryer in South Florida is almost always on a long horizontal duct carrying humid air, and that duct is behind more heat and airflow codes here than any component inside the machine. Photograph the display before you cut the power: a reset clears ERR, and on a Kenmore the characters plus three digits off the plate are most of the diagnosis.

### Where this meaning came from

Whirlpool’s own documentation: *Dryer error codes — Whirlpool Product Help*. Kenmore publishes none of its own, which is why every entry on this site names the manufacturer’s document instead.

What this one means

Whose code this actually is

Kenmore did not write ERR, because Kenmore has never built an appliance. This one is Whirlpool’s, and it appears on the dryer that Whirlpool built and Sears sold under the Kenmore badge. Whirlpool, LG and Frigidaire all built dryers for this badge, and all three publish short two-character codes, so a lookup that skips the prefix is a coin toss dressed as an answer.

What it means

Whirlpool's wording: the door has not been completely closed and latched, and the dryer will not run until it is.

Which Kenmore models can raise it

The Kenmore dryer whose model number begins 110 — the three digits before the period on the rating plate. Those digits are Whirlpool’s, which is why Whirlpool’s table is the one that applies to ERR and no other manufacturer’s does.

Worth trying yourself, in this order

Close the door firmly.

A door that has to be slammed is a catch or a hinge, and it is a small repair.

Where this usually goes

The job this most often becomes is diagnostic visit, and that page carries a starting figure and the reasons that move it. A Kenmore dryer in South Florida is almost always on a long horizontal duct carrying humid air, and that duct is behind more heat and airflow codes here than any component inside the machine. Photograph the display before you cut the power: a reset clears ERR, and on a Kenmore the characters plus three digits off the plate are most of the diagnosis.

Where this meaning came from

Whirlpool’s own documentation: Dryer error codes — Whirlpool Product Help. Kenmore publishes none of its own, which is why every entry on this site names the manufacturer’s document instead.

---

**[Read full article: Whirlpool-built Kenmore dryer error code ERR](https://kenmoremiami.support/error-codes/whirlpool-dryer-err/)**