---
title: "Whirlpool-built Kenmore dryer error code F1 E3"
description: "Whirlpool-built Kenmore dryer error code F1 E3 — whirlpool wrote this code, not Kenmore."
url: "https://kenmoremiami.support/error-codes/whirlpool-dryer-f1-e3/"
date_modified: "2026-09-01"
Appliance type: "Dryers"
---


# Whirlpool-built Kenmore dryer error code F1 E3

### Whose code this actually is

Kenmore did not write F1 E3, because Kenmore has never built an appliance. This one is Whirlpool’s, and it appears on the dryer that Whirlpool built and Sears sold under the Kenmore badge. Whirlpool, LG and Frigidaire all built dryers for this badge, and all three publish short two-character codes, so a lookup that skips the prefix is a coin toss dressed as an answer.

### What it means

Whirlpool's wording: an issue with the control unit or the wiring associated with it.

### Which Kenmore models can raise it

The Kenmore dryer whose model number begins 110 — the three digits before the period on the rating plate. Those digits are Whirlpool’s, which is why Whirlpool’s table is the one that applies to F1 E3 and no other manufacturer’s does.

### The other ways it may be written

The same condition is published under more than one label, because it has been carried across generations of the appliance and because a segment display draws some characters oddly: **F1 E4, F1 E5**. They are the same finding and they lead to the same place.

### What happens next

- Cut the power at the breaker for a minute and restore it.
- Recurring control codes after a storm are worth looking at as surge damage rather than as wear.

### Where this usually goes

The job this most often becomes is [diagnostic visit](/services/diagnostic-visit/), and that page carries a starting figure and the reasons that move it. A Kenmore dryer in South Florida is almost always on a long horizontal duct carrying humid air, and that duct is behind more heat and airflow codes here than any component inside the machine. Photograph the display before you cut the power: a reset clears F1 E3, and on a Kenmore the characters plus three digits off the plate are most of the diagnosis.

### Where this meaning came from

Whirlpool’s own documentation: *Dryer error codes — Whirlpool Product Help*. Kenmore publishes none of its own, which is why every entry on this site names the manufacturer’s document instead.

What this one means

Whose code this actually is

Kenmore did not write F1 E3, because Kenmore has never built an appliance. This one is Whirlpool’s, and it appears on the dryer that Whirlpool built and Sears sold under the Kenmore badge. Whirlpool, LG and Frigidaire all built dryers for this badge, and all three publish short two-character codes, so a lookup that skips the prefix is a coin toss dressed as an answer.

What it means

Whirlpool's wording: an issue with the control unit or the wiring associated with it.

Which Kenmore models can raise it

The Kenmore dryer whose model number begins 110 — the three digits before the period on the rating plate. Those digits are Whirlpool’s, which is why Whirlpool’s table is the one that applies to F1 E3 and no other manufacturer’s does.

The other ways it may be written

The same condition is published under more than one label, because it has been carried across generations of the appliance and because a segment display draws some characters oddly: F1 E4, F1 E5. They are the same finding and they lead to the same place.

What happens next

Cut the power at the breaker for a minute and restore it.

Recurring control codes after a storm are worth looking at as surge damage rather than as wear.

Where this usually goes

The job this most often becomes is diagnostic visit, and that page carries a starting figure and the reasons that move it. A Kenmore dryer in South Florida is almost always on a long horizontal duct carrying humid air, and that duct is behind more heat and airflow codes here than any component inside the machine. Photograph the display before you cut the power: a reset clears F1 E3, and on a Kenmore the characters plus three digits off the plate are most of the diagnosis.

Where this meaning came from

Whirlpool’s own documentation: Dryer error codes — Whirlpool Product Help. Kenmore publishes none of its own, which is why every entry on this site names the manufacturer’s document instead.

---

**[Read full article: Whirlpool-built Kenmore dryer error code F1 E3](https://kenmoremiami.support/error-codes/whirlpool-dryer-f1-e3/)**