---
title: "Whirlpool-built Kenmore dryer error code F3 E3"
description: "Whirlpool-built Kenmore dryer error code F3 E3: whirlpool wrote this code, not Kenmore."
url: "https://kenmoremiami.support/error-codes/whirlpool-dryer-f3-e3/"
date_modified: "2026-09-01"
Appliance type: "Dryers"
---


# Whirlpool-built Kenmore dryer error code F3 E3

### Whose code this actually is

Kenmore did not write F3 E3, because Kenmore has never built an appliance. This one is Whirlpool’s, and it appears on the dryer that Whirlpool built and Sears sold under the Kenmore badge. Whirlpool, LG and Frigidaire all built dryers for this badge, and all three publish short two-character codes, so a lookup that skips the prefix is a coin toss dressed as an answer.

### What it means

Whirlpool identifies this as an inlet thermistor problem — the sensor that reads the air going into the drum.

### Which Kenmore models can raise it

The Kenmore dryer whose model number begins 110 — the three digits before the period on the rating plate. Those digits are Whirlpool’s, which is why Whirlpool’s table is the one that applies to F3 E3 and no other manufacturer’s does.

### What happens next

- Power cycle to rule out a one-off.
- A thermistor is an inexpensive part; the diagnosis is a resistance measurement against the maker's table.

### Where this usually goes

The job this most often becomes is [dryer heating element replacement](/services/dryer-heating-element-replacement/), and that page carries a starting figure and the reasons that move it. A Kenmore dryer in South Florida is almost always on a long horizontal duct carrying humid air, and that duct is behind more heat and airflow codes here than any component inside the machine. Photograph the display before you cut the power: a reset clears F3 E3, and on a Kenmore the characters plus three digits off the plate are most of the diagnosis.

### Where this meaning came from

Whirlpool’s own documentation: *Dryer error codes — Whirlpool Product Help*. Kenmore publishes none of its own, which is why every entry on this site names the manufacturer’s document instead.

What this one means

Whose code this actually is

Kenmore did not write F3 E3, because Kenmore has never built an appliance. This one is Whirlpool’s, and it appears on the dryer that Whirlpool built and Sears sold under the Kenmore badge. Whirlpool, LG and Frigidaire all built dryers for this badge, and all three publish short two-character codes, so a lookup that skips the prefix is a coin toss dressed as an answer.

What it means

Whirlpool identifies this as an inlet thermistor problem — the sensor that reads the air going into the drum.

Which Kenmore models can raise it

The Kenmore dryer whose model number begins 110 — the three digits before the period on the rating plate. Those digits are Whirlpool’s, which is why Whirlpool’s table is the one that applies to F3 E3 and no other manufacturer’s does.

What happens next

Power cycle to rule out a one-off.

A thermistor is an inexpensive part; the diagnosis is a resistance measurement against the maker's table.

Where this usually goes

The job this most often becomes is dryer heating element replacement, and that page carries a starting figure and the reasons that move it. A Kenmore dryer in South Florida is almost always on a long horizontal duct carrying humid air, and that duct is behind more heat and airflow codes here than any component inside the machine. Photograph the display before you cut the power: a reset clears F3 E3, and on a Kenmore the characters plus three digits off the plate are most of the diagnosis.

Where this meaning came from

Whirlpool’s own documentation: Dryer error codes — Whirlpool Product Help. Kenmore publishes none of its own, which is why every entry on this site names the manufacturer’s document instead.

---

**[Read full article: Whirlpool-built Kenmore dryer error code F3 E3](https://kenmoremiami.support/error-codes/whirlpool-dryer-f3-e3/)**