---
title: "Whirlpool-built Kenmore washer error code F7 E1"
description: "Whirlpool-built Kenmore washer error code F7 E1: whirlpool wrote this code, not Kenmore."
url: "https://kenmoremiami.support/error-codes/whirlpool-washer-f7-e1/"
date_modified: "2026-09-01"
Appliance type: "Washers"
---


# Whirlpool-built Kenmore washer error code F7 E1

### Whose code this actually is

Kenmore did not write F7 E1, because Kenmore has never built an appliance. This one is Whirlpool’s, and it appears on the washer that Whirlpool built and Sears sold under the Kenmore badge. Whirlpool-built and LG-built washers wear one badge and share almost none of their code scheme, so the wrong table here sends you to a pump when the machine is reporting a lid.

### What it means

A motor speed sensing error — the motor cannot reach the speed the cycle asked for.

### Which Kenmore models can raise it

The Kenmore washer whose model number begins 110 — the three digits before the period on the rating plate. Those digits are Whirlpool’s, which is why Whirlpool’s table is the one that applies to F7 E1 and no other manufacturer’s does.

### What happens next

- Check nothing is jamming the drum and that the load is not enormous.
- Where the drum turns freely by hand, the motor or its control is the answer and that is a visit.

### Where this usually goes

The job this most often becomes is [washer spin and drive repair](/services/washer-spin-and-drive-repair/), and that page carries a starting figure and the reasons that move it. A Kenmore washer in this county works in hard water and a warm laundry room, so a code that arrives with slow draining or long cycles is very often the supply or the drain rather than the machine. Photograph the display before you cut the power: a reset clears F7 E1, and on a Kenmore the characters plus three digits off the plate are most of the diagnosis.

### Where this meaning came from

Whirlpool’s own documentation: *Top Load HE Washer error codes — Whirlpool Product Help*. Kenmore publishes none of its own, which is why every entry on this site names the manufacturer’s document instead.

What this one means

Whose code this actually is

Kenmore did not write F7 E1, because Kenmore has never built an appliance. This one is Whirlpool’s, and it appears on the washer that Whirlpool built and Sears sold under the Kenmore badge. Whirlpool-built and LG-built washers wear one badge and share almost none of their code scheme, so the wrong table here sends you to a pump when the machine is reporting a lid.

What it means

A motor speed sensing error — the motor cannot reach the speed the cycle asked for.

Which Kenmore models can raise it

The Kenmore washer whose model number begins 110 — the three digits before the period on the rating plate. Those digits are Whirlpool’s, which is why Whirlpool’s table is the one that applies to F7 E1 and no other manufacturer’s does.

What happens next

Check nothing is jamming the drum and that the load is not enormous.

Where the drum turns freely by hand, the motor or its control is the answer and that is a visit.

Where this usually goes

The job this most often becomes is washer spin and drive repair, and that page carries a starting figure and the reasons that move it. A Kenmore washer in this county works in hard water and a warm laundry room, so a code that arrives with slow draining or long cycles is very often the supply or the drain rather than the machine. Photograph the display before you cut the power: a reset clears F7 E1, and on a Kenmore the characters plus three digits off the plate are most of the diagnosis.

Where this meaning came from

Whirlpool’s own documentation: Top Load HE Washer error codes — Whirlpool Product Help. Kenmore publishes none of its own, which is why every entry on this site names the manufacturer’s document instead.

---

**[Read full article: Whirlpool-built Kenmore washer error code F7 E1](https://kenmoremiami.support/error-codes/whirlpool-washer-f7-e1/)**