---
title: "Whirlpool-built Kenmore washer error code uL"
description: "Whirlpool-built Kenmore washer error code uL — whirlpool wrote this code, not Kenmore."
url: "https://kenmoremiami.support/error-codes/whirlpool-washer-ul/"
date_modified: "2026-09-01"
Appliance type: "Washers"
---


# Whirlpool-built Kenmore washer error code uL

### Whose code this actually is

Kenmore did not write uL, because Kenmore has never built an appliance. This one is Whirlpool’s, and it appears on the washer that Whirlpool built and Sears sold under the Kenmore badge. Whirlpool-built and LG-built washers wear one badge and share almost none of their code scheme, so the wrong table here sends you to a pump when the machine is reporting a lid.

### What it means

The load is out of balance and the machine could not correct it on its own. It stops and asks you to redistribute the load by hand.

### Which Kenmore models can raise it

The Kenmore washer whose model number begins 110 — the three digits before the period on the rating plate. Those digits are Whirlpool’s, which is why Whirlpool’s table is the one that applies to uL and no other manufacturer’s does.

### The other ways it may be written

The same condition is published under more than one label, because it has been carried across generations of the appliance and because a segment display draws some characters oddly: **OFb, ofb, Ofb, F0 E5, F0 E9**. They are the same finding and they lead to the same place.

### Worth trying yourself, in this order

- Open the lid and spread the load evenly around the basket.
- Wash one heavy item with a couple of lighter ones rather than on its own.
- If it happens on every load, the machine is not level — that is an installation problem, not a wash one.

### Where this usually goes

The job this most often becomes is [diagnostic visit](/services/diagnostic-visit/), and that page carries a starting figure and the reasons that move it. A Kenmore washer in this county works in hard water and a warm laundry room, so a code that arrives with slow draining or long cycles is very often the supply or the drain rather than the machine. Photograph the display before you cut the power: a reset clears uL, and on a Kenmore the characters plus three digits off the plate are most of the diagnosis.

### Where this meaning came from

Whirlpool’s own documentation: *Top Load HE Washer error codes — Whirlpool Product Help*. Kenmore publishes none of its own, which is why every entry on this site names the manufacturer’s document instead.

What this one means

Whose code this actually is

Kenmore did not write uL, because Kenmore has never built an appliance. This one is Whirlpool’s, and it appears on the washer that Whirlpool built and Sears sold under the Kenmore badge. Whirlpool-built and LG-built washers wear one badge and share almost none of their code scheme, so the wrong table here sends you to a pump when the machine is reporting a lid.

What it means

The load is out of balance and the machine could not correct it on its own. It stops and asks you to redistribute the load by hand.

Which Kenmore models can raise it

The Kenmore washer whose model number begins 110 — the three digits before the period on the rating plate. Those digits are Whirlpool’s, which is why Whirlpool’s table is the one that applies to uL and no other manufacturer’s does.

The other ways it may be written

The same condition is published under more than one label, because it has been carried across generations of the appliance and because a segment display draws some characters oddly: OFb, ofb, Ofb, F0 E5, F0 E9. They are the same finding and they lead to the same place.

Worth trying yourself, in this order

Open the lid and spread the load evenly around the basket.

Wash one heavy item with a couple of lighter ones rather than on its own.

If it happens on every load, the machine is not level — that is an installation problem, not a wash one.

Where this usually goes

The job this most often becomes is diagnostic visit, and that page carries a starting figure and the reasons that move it. A Kenmore washer in this county works in hard water and a warm laundry room, so a code that arrives with slow draining or long cycles is very often the supply or the drain rather than the machine. Photograph the display before you cut the power: a reset clears uL, and on a Kenmore the characters plus three digits off the plate are most of the diagnosis.

Where this meaning came from

Whirlpool’s own documentation: Top Load HE Washer error codes — Whirlpool Product Help. Kenmore publishes none of its own, which is why every entry on this site names the manufacturer’s document instead.

---

**[Read full article: Whirlpool-built Kenmore washer error code uL](https://kenmoremiami.support/error-codes/whirlpool-washer-ul/)**