Error code
Whirlpool-built Kenmore dishwasher error code F9 E2
Whirlpool wrote this code, not Kenmore. On a dishwasher wearing this badge, F9 E2 means: A drain motor error. Which model prefixes can raise it, and what to do next.
- From $95 diagnostic, credited to the repair
- 59 cities and neighborhoods covered
- OEM parts available on order
- In writing the price, before anything is opened
What we can confirm
Code F9 E2, from the manufacturer's own documentation
A code is only meaningful together with the machine showing it — the same digits mean different things on different equipment.
What it narrows down to
A drain motor error
What you are probably seeing
Diagnostic
From $95, credited to the repair
What it looks like from the kitchen
The symptom this code usually arrives with
A code names the subsystem; the symptom is what sent you to look at the display in the first place. That page says what it usually turns out to be, cheapest cause first.
-
Standing water in the bottom after a finished cycle Dishwasher not draining
Three manufacturers built the Kenmore dishwashers in South Florida kitchens and all three publish a code for this, in three different alphabets. Which one you are reading decides which table it means something in — and a code read against the wrong maker points confidently at the wrong part.
- A little water in the sump is normal
- The disposer plug is free to check and often the answer
- Three builders, three different codes for one condition
On the same appliance
What else belongs to the dishwashers
On this make a code belongs to the appliance rather than to a product line. These are the other conditions this machine can display, and the models that can show this one — a display often has more than one thing to say, and the model number decides what any of it costs to put right.
Other codes this appliance can display
Whirlpool's own label is Long Drain: the dishwasher is not draining properly
The fill valve is stuck open — the machine
Whirlpool's own wording: not detecting water
A fill valve electrical error
Whirlpool's own label: excessive suds
The water float switch
The heating system
The thermistor or the water quality sensor
A wash motor error
A diverter valve error
A diverter leak
Whirlpool's own label: control module
The same digits mean different things on different equipment. Search the full code list
In more detail
About Whirlpool-built Kenmore dishwasher error code F9 E2
Whose code this actually is
Kenmore did not write F9 E2, because Kenmore has never built an appliance. This one is Whirlpool's, and it appears on the dishwasher that Whirlpool built and Sears sold under the Kenmore badge. Whirlpool, Frigidaire and Bosch all built dishwashers for this badge, and their numbering overlaps enough to be convincing while meaning entirely different things.
What it means
A drain motor error.
Which Kenmore models can raise it
The Kenmore dishwasher whose model number begins 665 — the three digits before the period on the rating plate. Those digits are Whirlpool's, which is why Whirlpool's table is the one that applies to F9 E2 and no other manufacturer's does.
What happens next
- Rule out a blockage first: a pump stopped by a fruit stone reports the same thing as a failed one.
- Where the motor is genuinely dead, it is an accessible part on these machines.
Where this usually goes
The job this most often becomes is dishwasher drain repair, and that page carries a starting figure and the reasons that move it. A Kenmore dishwasher on this water scales its heater and its spray arms faster than the manual assumes, so codes about temperature and wash performance are read here with the supply in mind first. Photograph the display before you cut the power: a reset clears F9 E2, and on a Kenmore the characters plus three digits off the plate are most of the diagnosis.
Where this meaning came from
Whirlpool's own documentation: Dishwasher error codes and flashing lights — Whirlpool Product Help. Kenmore publishes none of its own, which is why every entry on this site names the manufacturer's document instead.
This article is based on:
- Official manufacturer documentation
- Internal repair procedures
- Technician repair history
- Company quality standards