Error code
Frigidaire-built Kenmore dishwasher signal L0
L0 is an indicator rather than an error. Frigidaire publishes it for the dishwasher this badge covers, and it means: The rinse aid dosage level on models that show it.
- From $95 diagnostic, credited to the repair
- 59 cities and neighborhoods covered
- OEM parts available on order
- In writing the price, before anything is opened
What we can confirm
Signal L0, from the manufacturer's own documentation
This code has no number, because this equipment has no display to put one on. The appliance signals it instead — an alarm, a symbol or a pattern of lights — and what it means is recorded in the documentation that ships with it.
The signal
L0
The rinse aid dosage level on models that show it.
or call (305) 680-1018
What it narrows down to
The rinse aid dosage level on models that show it
Diagnostic
From $95, credited to the repair
On the same appliance
What else belongs to the dishwashers
On this make a code belongs to the appliance rather than to a product line. These are the other conditions this machine can display, and the models that can show this one — a display often has more than one thing to say, and the model number decides what any of it costs to put right.
Other codes this appliance can display
Whirlpool's own label is Long Drain: the dishwasher is not draining properly
A drain motor error
The fill valve is stuck open — the machine
Whirlpool's own wording: not detecting water
A fill valve electrical error
Whirlpool's own label: excessive suds
The water float switch
The heating system
The thermistor or the water quality sensor
A wash motor error
A diverter valve error
A diverter leak
The same digits mean different things on different equipment. Search the full code list
In more detail
About Frigidaire-built Kenmore dishwasher signal L0
Whose code this actually is
Kenmore did not write L0, because Kenmore has never built an appliance. This one is Frigidaire's, and it appears on the dishwasher that Frigidaire built and Sears sold under the Kenmore badge. Whirlpool, Frigidaire and Bosch all built dishwashers for this badge, and their numbering overlaps enough to be convincing while meaning entirely different things.
What the appliance is telling you
The rinse aid dosage level on models that show it.
This one is an indicator rather than an error. It is published in the same table as genuine problems, and treating it as one is how a working appliance gets a service call.
Which Kenmore models can raise it
The Kenmore dishwasher whose model number begins 587 — the three digits before the period on the rating plate. Those digits are Frigidaire's, which is why Frigidaire's table is the one that applies to L0 and no other manufacturer's does.
The other ways it may be written
The same condition is published under more than one label, because it has been carried across generations of the appliance and because a segment display draws some characters oddly: L1, L2, L3, L4, L5, L6. They are the same finding and they lead to the same place.
Worth trying yourself, in this order
- A setting. Turn it up if you are getting spots on this water — most people here should be higher than the default.
Where this usually goes
The job this most often becomes is diagnostic visit, and that page carries a starting figure and the reasons that move it. A Kenmore dishwasher on this water scales its heater and its spray arms faster than the manual assumes, so codes about temperature and wash performance are read here with the supply in mind first. Photograph the display before you cut the power: a reset clears L0, and on a Kenmore the characters plus three digits off the plate are most of the diagnosis.
Where this meaning came from
Frigidaire's own documentation: Dishwasher Error Codes and Alarms Guide, Frigidaire owner support. Kenmore publishes none of its own, which is why every entry on this site names the manufacturer's document instead.
This article is based on:
- Official manufacturer documentation
- Internal repair procedures
- Technician repair history
- Company quality standards