Error code
Whirlpool-built Kenmore refrigerator signal PO
PO is an indicator rather than an error. Whirlpool publishes it for the refrigerator this badge covers, and it means: Whirlpool's own wording: the power outage indicator tells you the supply to the refrigerator was off long enough to matter, and while
- From $95 diagnostic, credited to the repair
- 59 cities and neighborhoods covered
- OEM parts available on order
- In writing the price, before anything is opened
What we can confirm
Signal PO, from the manufacturer's own documentation
This code has no number, because this equipment has no display to put one on. The appliance signals it instead — an alarm, a symbol or a pattern of lights — and what it means is recorded in the documentation that ships with it.
The signal
PO
Whirlpool's own wording: the power outage indicator tells you the supply to the refrigerator was off long enough to matter, and while it shows, the controls are disabled.
or call (305) 680-1018
What it narrows down to
Whirlpool's own wording: the power outage indicator tells you
Diagnostic
From $95, credited to the repair
On the same appliance
What else belongs to the refrigerators
On this make a code belongs to the appliance rather than to a product line. These are the other conditions this machine can display, and the models that can show this one — a display often has more than one thing to say, and the model number decides what any of it costs to put right.
Other codes this appliance can display
The alarm sounds when a door or the freezer
Whirlpool's own thresholds: it alerts when the refrigerator rises
Whirlpool's wording: the refrigerator and freezer will not cool
The filter status light telling you the water filter is due
The air filter status, in three stages: blue is
Whirlpool publishes the fact that an F is flashing
A freezer fan problem
A refrigerator fan problem — the same class of
A defrost heater circuit problem
A sealed-system problem — LG's published meaning is a
Sabbath mode
Frigidaire's own wording: the power failure light indicates an
The same digits mean different things on different equipment. Search the full code list
In more detail
About Whirlpool-built Kenmore refrigerator signal PO
Whose code this actually is
Kenmore did not write PO, because Kenmore has never built an appliance. This one is Whirlpool's, and it appears on the refrigerator that Whirlpool built and Sears sold under the Kenmore badge. Four different manufacturers built refrigerators under this badge, and several of them use an F with a number for unrelated conditions. That is the single most convincing way to reach the wrong component.
What the appliance is telling you
Whirlpool's own wording: the power outage indicator tells you the supply to the refrigerator was off long enough to matter, and while it shows, the controls are disabled.
This one is an indicator rather than an error. It is published in the same table as genuine problems, and treating it as one is how a working appliance gets a service call.
Which Kenmore models can raise it
The Kenmore refrigerator whose model number begins 106 — the three digits before the period on the rating plate. Those digits are Whirlpool's, which is why Whirlpool's table is the one that applies to PO and no other manufacturer's does.
Nothing is broken here
This clears on its own or after the appliance is restarted, and no part is involved. If it keeps coming back without anything obvious causing it, that repetition is the finding rather than the message itself.
Worth trying yourself, in this order
- Clear it at the panel and the controls come back.
- The useful part is the food: it tells you the cabinet was without power, which the door does not.
Where this usually goes
The job this most often becomes is diagnostic visit, and that page carries a starting figure and the reasons that move it. A Kenmore refrigerator in this humidity hands its defrost circuit more work than it was sized for, and in a Miami kitchen a floor-level condenser blocks well ahead of any published interval. Photograph the display before you cut the power: a reset clears PO, and on a Kenmore the characters plus three digits off the plate are most of the diagnosis.
Where this meaning came from
Whirlpool's own documentation: Refrigerator display and indicator guide — Whirlpool Product Help. Kenmore publishes none of its own, which is why every entry on this site names the manufacturer's document instead.
This article is based on:
- Official manufacturer documentation
- Internal repair procedures
- Technician repair history
- Company quality standards