Error code
Whirlpool-built Kenmore refrigerator signal Door alarm
Door alarm is an indicator rather than an error. Whirlpool publishes it for the refrigerator this badge covers, and it means: The alarm sounds when a door or the freezer drawer has been left open for two to five minutes depending on
- From $95 diagnostic, credited to the repair
- 59 cities and neighborhoods covered
- OEM parts available on order
- In writing the price, before anything is opened
What we can confirm
Signal Door alarm, from the manufacturer's own documentation
This code has no number, because this equipment has no display to put one on. The appliance signals it instead — an alarm, a symbol or a pattern of lights — and what it means is recorded in the documentation that ships with it.
The signal
Door alarm
The alarm sounds when a door or the freezer drawer has been left open for two to five minutes depending on the model.
or call (305) 680-1018
What it narrows down to
The alarm sounds when a door or the freezer
What you are probably seeing
Diagnostic
From $95, credited to the repair
What it looks like from the kitchen
The symptom this code usually arrives with
A code names the subsystem; the symptom is what sent you to look at the display in the first place. That page says what it usually turns out to be, cheapest cause first.
-
Water in the crisper, or on the floor Refrigerator leaking water
Where the water lands is rarely where it comes from. There are only four realistic sources on these cabinets, and telling them apart is quick once you know where to look — which is why this is one of the symptoms most worth describing carefully on the phone.
- Water inside and water outside are different problems
- A blocked defrost drain is the commonest cause
- In this climate condensation is a real answer
On the same appliance
What else belongs to the refrigerators
On this make a code belongs to the appliance rather than to a product line. These are the other conditions this machine can display, and the models that can show this one — a display often has more than one thing to say, and the model number decides what any of it costs to put right.
Other codes this appliance can display
Whirlpool's own wording: the power outage indicator tells you
Whirlpool's own thresholds: it alerts when the refrigerator rises
Whirlpool's wording: the refrigerator and freezer will not cool
The filter status light telling you the water filter is due
The air filter status, in three stages: blue is
Whirlpool publishes the fact that an F is flashing
A freezer fan problem
A refrigerator fan problem — the same class of
A defrost heater circuit problem
A sealed-system problem — LG's published meaning is a
Sabbath mode
Frigidaire's own wording: the power failure light indicates an
The same digits mean different things on different equipment. Search the full code list
In more detail
About Whirlpool-built Kenmore refrigerator signal Door alarm
Whose code this actually is
Kenmore did not write Door alarm, because Kenmore has never built an appliance. This one is Whirlpool's, and it appears on the refrigerator that Whirlpool built and Sears sold under the Kenmore badge. Four different manufacturers built refrigerators under this badge, and several of them use an F with a number for unrelated conditions. That is the single most convincing way to reach the wrong component.
What the appliance is telling you
The alarm sounds when a door or the freezer drawer has been left open for two to five minutes depending on the model.
This one is an indicator rather than an error. It is published in the same table as genuine problems, and treating it as one is how a working appliance gets a service call.
Which Kenmore models can raise it
The Kenmore refrigerator whose model number begins 106 — the three digits before the period on the rating plate. Those digits are Whirlpool's, which is why Whirlpool's table is the one that applies to Door alarm and no other manufacturer's does.
The other ways it may be written
The same condition is published under more than one label, because it has been carried across generations of the appliance and because a segment display draws some characters oddly: Door ajar. They are the same finding and they lead to the same place.
Worth trying yourself, in this order
- Check nothing is holding a door open — a drawer pushed out, a bottle on a shelf edge.
- In this humidity a door left open long enough to alarm puts real ice into the freezer, and that is where a defrost problem starts.
Where this usually goes
The job this most often becomes is diagnostic visit, and that page carries a starting figure and the reasons that move it. A Kenmore refrigerator in this humidity hands its defrost circuit more work than it was sized for, and in a Miami kitchen a floor-level condenser blocks well ahead of any published interval. Photograph the display before you cut the power: a reset clears Door alarm, and on a Kenmore the characters plus three digits off the plate are most of the diagnosis.
Where this meaning came from
Whirlpool's own documentation: Refrigerator display and indicator guide — Whirlpool Product Help. Kenmore publishes none of its own, which is why every entry on this site names the manufacturer's document instead.
This article is based on:
- Official manufacturer documentation
- Internal repair procedures
- Technician repair history
- Company quality standards