Error code
Frigidaire-built Kenmore range error code F30
Frigidaire wrote this code, not Kenmore. On a range wearing this badge, F30 means: Frigidaire's own label: open probe. The oven temperature sensor circuit is open. Which model prefixes can raise it, and what to do next.
- From $95 diagnostic, credited to the repair
- 59 cities and neighborhoods covered
- OEM parts available on order
- In writing the price, before anything is opened
What we can confirm
Code F30, from the manufacturer's own documentation
A code is only meaningful together with the machine showing it — the same digits mean different things on different equipment.
The code
F30
Frigidaire's own label: open probe. The oven temperature sensor circuit is open.
or call (305) 680-1018
What it narrows down to
Frigidaire's own label: open probe
What you are probably seeing
Diagnostic
From $95, credited to the repair
What it looks like from the kitchen
The symptom this code usually arrives with
A code names the subsystem; the symptom is what sent you to look at the display in the first place. That page says what it usually turns out to be, cheapest cause first.
-
It will not reach temperature, or takes far too long Oven not heating
Two answers cover most of these and they are cheap to tell apart. A failed bake element usually shows itself, and a temperature sensor that has drifted does not show anything at all — it simply reports the wrong number and the oven confidently holds a temperature it is not at.
- A bake element usually shows visible damage
- A sensor problem shows nothing at all
- A consistent offset is the sensor's signature
On the same appliance
What else belongs to the ranges
On this make a code belongs to the appliance rather than to a product line. These are the other conditions this machine can display, and the models that can show this one — a display often has more than one thing to say, and the model number decides what any of it costs to put right.
Other codes this appliance can display
Frigidaire's own wording: F10 indicates the oven is detecting higher-than-normal temperatures
Frigidaire's own label: shorted probe
Frigidaire's own label: shorted key pad
Frigidaire's own label: a door lock issue
Frigidaire's own label: cooktop lock out
Frigidaire's own label: communication error — the parts of
Frigidaire names these micro identification and E prompt failure
A dash in the display means the cooktop is locked
The oven is running in demonstration mode: the panel
The same digits mean different things on different equipment. Search the full code list
In more detail
About Frigidaire-built Kenmore range error code F30
Whose code this actually is
Kenmore did not write F30, because Kenmore has never built an appliance. This one is Frigidaire's, and it appears on the range that Frigidaire built and Sears sold under the Kenmore badge. Ranges under this badge came from Frigidaire, GE and Roper, and one of those three publishes no code documentation at all — so even knowing a range is not enough. The prefix is.
What it means
Frigidaire's own label: open probe. The oven temperature sensor circuit is open.
Which Kenmore models can raise it
The Kenmore range whose model number begins 790 — the three digits before the period on the rating plate. Those digits are Frigidaire's, which is why Frigidaire's table is the one that applies to F30 and no other manufacturer's does.
What happens next
- Thirty seconds off the breaker.
- The sensor is an inexpensive part and a short job on a freestanding range.
- An oven that never reaches temperature and shows this is usually exactly this.
Where this usually goes
The job this most often becomes is oven sensor and calibration service, and that page carries a starting figure and the reasons that move it. A Kenmore range in a South Florida kitchen is usually freestanding rather than built in, which keeps the access short and means most of these end in one visit. Photograph the display before you cut the power: a reset clears F30, and on a Kenmore the characters plus three digits off the plate are most of the diagnosis.
Where this meaning came from
Frigidaire's own documentation: Ranges — Error Code Guide, Frigidaire owner support. Kenmore publishes none of its own, which is why every entry on this site names the manufacturer's document instead.
This article is based on:
- Official manufacturer documentation
- Internal repair procedures
- Technician repair history
- Company quality standards