Model
Kenmore 11026002012 repair
Kenmore 11026002012 repair in Miami: what owners of this Kenmore unit search for, what those symptoms usually point at, and what the work involves. Diagnostic from $95, credited toward the repair.
- From $95 diagnostic, credited to the repair
- 59 cities and neighborhoods covered
- OEM parts available on order
- In writing the price, before anything is opened
The short version
What the number tells us
The full model number decides which parts exist, how quickly they arrive and what a repair on this unit is worth. It is the first thing we ask for.
Model
11026002012
Give us this number when you book and the technician arrives knowing what the unit is and which parts it takes.
or call (305) 680-1018
Parts
OEM on order; legacy parts take longer
Diagnostic
From $95, credited to the repair
What we can tell you
What this number means for a repair
Not a specification table. Capacity, dimensions and production years are not something we can verify, and a plausible-looking table of them would be invention rather than information.
-
The full number is the first thing we ask for
It decides what the display can tell you and how easily parts are found, and the data plate settles it in one line. Letters after the digits are not decoration — they identify the configuration, and two units sharing the digits can take different components.
-
What we ask you to read off the unit
The data plate, not the box or the invoice. On this equipment it sits inside the cabinet — along a side wall, behind the lowest drawer, or under the lid of a wine cabinet — and it carries the full number and the service index together. A photograph of it is worth more than any table we could publish.
What owners of this model ask about
The symptoms searched most often with the 11026002012
Taken from real search suggestions rather than from a list we made up. Each page says what the symptom usually points at and what to check first.
-
The cycle ended and the drum is still full Washer will not drain
This is the symptom where the decode earns its keep most visibly. A 110 is a Whirlpool and a 796 is an LG, and on this exact problem one of them will usually name it on the display while the other simply stops. The repair is similar; the phone call is completely different.
- 110 stops quietly, 796 usually says why
- The filter or coin trap comes before the pump
- The pump is blamed far more often than it fails
-
The load comes out soaking Washer will not spin
The cheap answers come first here and they are right most of the time. Every washer refuses to spin rather than risk it, so the things that stop a spin are mostly safety interlocks and load balance rather than the drive.
- Balance and the lock before the drive
- Two builders, two drive systems
- The motor is rarely the answer
-
Water on the floor, and rarely from where it looks Washer leaking
The useful question is not where the water is but when it appears. Fill, wash, drain and spin put water in different places at different pressures, and which part of the cycle leaks narrows it faster than any inspection.
- When it leaks matters more than where
- Fill hoses are checked every visit
- The gasket fold is a local suspect
-
It is plugged in, the panel responds, and nothing happens Washer will not start
Almost always an interlock or a setting rather than a failure. Every one of these machines refuses to run rather than risk an open lid, and both manufacturers have a control lock that makes the panel look dead while nothing at all is wrong.
- The lid or door lock is the usual answer
- Control lock looks exactly like a failure
- Both builders publish a code for it
Also called out to on this equipment
- Refrigerator not cooling
- Refrigerator warm and freezer cold
- Ice maker not making ice
- Refrigerator leaking water
- Frost building up in the freezer
- Standalone ice maker making less ice
- Dishwasher not draining
- Dishwasher not cleaning
- Dishwasher will not start
- Dryer not drying
- Dryer with no heat
- Dryer making noise
- Oven not heating
- Oven door locked shut
- One cooktop burner not working
- Range hood not pulling air
In more detail
About Kenmore 11026002012 repair
How this number is printed on your appliance
On the rating plate it reads 110.26002012, with a period after the first three digits. We write it here as 11026002012, without the period, because that is the form people type and the form a search engine treats as one word — but the number on your appliance is the first one, and if what you are holding matches 110.26002012 then this is the right page.
The three digits before that period are the useful part. 110 means Whirlpool built this appliance. Kenmore has never manufactured one — it is a nameplate, and the manufacturer behind it is what decides the parts, the diagnostic sequence and whether there is a published code table to read at all.
Whirlpool built this one. 110 is Whirlpool's laundry prefix, and the parts, the service documentation and the codes on the display are Whirlpool's.
What the display can tell you
The Kenmore reports very little through its display, which is why more of the diagnosis on this generation is measured rather than read. If something is showing on yours, photograph it before it clears and look it up in the full error code list — codes do not wait, and the number is often gone by the time a technician arrives.
What we do not publish about it
No specification table: capacity, dimensions, configuration and production years are not something we can verify, and a plausible-looking table of them would be invention rather than information. What we can tell you is what the number means for a repair — which generation it is, what its display can report, and how easily parts are found.
Before you call
- Check the full model number on the data plate — the three digits are the family, and the letters after them matter for parts
- Photograph the display if anything is showing on it
- Look at the condenser through the grille
- Note whether this started after a power cut
This article is based on:
- Official manufacturer documentation
- Internal repair procedures
- Technician repair history
- Company quality standards
Before you book
Questions about Kenmore 11026002012 repair
Is the 11026002012 still worth repairing?
Usually. The Kenmore was built to be repaired, and a cabinet in good condition with sound cabinetry is worth keeping well past twenty years. Where the work approaches what the unit is worth, or a second major failure is already visible, we say so on the visit rather than after.
Can you still get parts for the 11026002012?
For most of what fails, yes — OEM parts are ordered against your model. Legacy parts can take a few days to source, which is why we confirm a part is the problem before ordering it rather than after.
Where do I find the full model number on a 11026002012?
Inside the door opening or under the lid, on the frame. Photograph the whole plate rather than writing it down — the letters after the digits decide which parts fit, and they are the part people misread most often.
What tends to go wrong on the 11026002012?
Judging by what its owners search for: washer will not drain, washer will not spin, washer leaking, and washer will not start. Each of those has a page explaining the likely causes and what to check before booking anything.
My plate says 110.26002012. Is that the same appliance?
Yes. 110.26002012 and 11026002012 are one number written two ways — the period is how the plate prints it and we drop it so the number reads as a single term. Give us the whole thing including everything after the period when you book, because the digits after it identify the specific machine and the ones before it identify Whirlpool as the company that built it.