Repair cost
Kenmore oven element replacement cost
A volume part with straightforward access on a freestanding range and considerably more of it on a wall oven built into a stack. That difference is the reason this is a 'from' and the reason the wall oven pages say access is the cost.
- From $95 diagnostic, credited to the repair
- 59 cities and neighborhoods covered
- OEM parts available on order
- In writing the price, before anything is opened
The short version
Where this figure comes from
A starting point for built-in appliances in South Florida, published so the number is not a mystery until somebody is standing in your kitchen.
Starts at
from $165
After a diagnostic from $95, which comes off the bill when you go ahead with the work.
or call (305) 680-1018
It is not
A quote for your unit
Exact cost
Confirmed after the on-site diagnostic
Warranty
On the labor we performed
What moves it
Why two of the same job cost different amounts
These apply at the same time and in both directions. Which of them is true of your kitchen is what the on-site diagnostic settles.
-
Freestanding range or built-in wall oven
A range pulls forward. A wall oven comes out of cabinetry, and on a double stack it comes out with help. Same part, very different visit.
-
Bake, broil or convection
Three elements, three prices, three access routes. Which one has gone is decided by which function fails rather than by looking at any of them.
-
Whether the element is visibly broken
Frequently it is not. Elements fail open with no visible mark at all, which is why looking is not a test and a meter is.
-
Which company built the range
790 and 970 are Frigidaire lineage, 362 is GE, 911 is Roper. The elements are inexpensive on all of them; the terminal blocks and the routes behind the rear panel differ.
-
Whether the control is involved
An element that never gets power is not a broken element. Separating the component from the relay that feeds it is part of the diagnosis.
The work itself
What we actually do
The job behind the figure: what it involves, when a symptom points at it, and what we check first.
-
from $165 Oven element replacement
An oven that will not reach temperature, or one that browns the top and never cooks through. A failed bake element often shows it — a blister, a break, a bright spot — and it is one of the few appliance repairs where looking is genuinely diagnostic.
- Usually visible, and always tested as well
- Bake and broil are separate elements
- The sensor ruled out at the same time
In more detail
About Kenmore oven element replacement cost
Why the same part costs different amounts to fit
Because most of this figure is access. On a freestanding range the element is reached from inside the cavity with the machine pulled forward. On a wall oven built into a run of cabinetry, particularly a double, the appliance has to come out of the opening and go back in true. The component is nearly identical; the visit is not, and pretending otherwise would mean quoting one of them wrong.
Three elements, three symptoms
An oven that will not brown from above is a broil circuit. One that will not reach temperature at all is more likely bake. A convection oven that cooks unevenly with everything else working may be the fan element. Describing which function has stopped is more useful than describing the temperature.
The check before the part
Whether the element is receiving power at all. A perfectly good element fed by a failed relay behaves exactly like a dead one, and replacing it changes nothing. That measurement is quick, it is part of the diagnostic, and it is what stops a wasted part.
This article is based on:
- Official manufacturer documentation
- Internal repair procedures
- Technician repair history
- Company quality standards
Before you book
Questions about Kenmore oven element replacement cost
The cooktop works and the oven does not.
That sentence has already separated two circuits, which is genuinely useful. It points firmly at the oven side — element, sensor or control — rather than at anything shared.
It looks fine. Can it still be broken?
Easily. An element can fail open anywhere along its length with no visible damage, and a meter finds it in seconds. Visual inspection is the least reliable test on this repair.
Where we do it
Across Miami-Dade, Broward, and Palm Beach
Same terms everywhere we go: an on-site diagnostic first, the price agreed in writing, and the exact figure confirmed once we have seen the unit.
Neighborhoods people ask for by name