- “When it leaks matters more than where”
- “Fill hoses are checked every visit”
- “The gasket fold is a local suspect”
Symptom
Kenmore washer leaking
The useful question is not where the water is but when it appears. Fill, wash, drain and spin put water in different places at different pressures, and which part of the cycle leaks narrows it faster than any inspection.
- From $95 diagnostic, credited to the repair
- 59 cities and neighborhoods covered
- OEM parts available on order
- In writing the price, before anything is opened
Six ordinary causes
What this usually turns out to be
Cheapest and commonest first, which is also the order we check them in. They sit hundreds of dollars apart, and only the unit settles which one is yours.
-
The door gasket
On a front-loader. The fold catches lint and coins and starts weeping before it visibly tears.
Washer leak repair from $155 -
Fill hoses
Checked as a matter of course. A burst fill hose is the single most damaging thing a laundry room can do.
Washer leak repair from $155 -
The dispenser
A blocked drawer overflows behind the panel and appears on the floor at the front.
Washer leak repair from $155 -
The drain path
Pump housing, clamps and the connection at the standpipe.
Washer leak repair from $155 -
Too much detergent
Foam finds its way out of places water does not. It is a real cause and it is free to correct.
Washer leak repair from $155 -
The tub seal
Last, and a serious job. Everything above is cheaper and more likely.
Washer spin and drive repair from $185
In five minutes
Before you call anybody
None of it needs tools, and all of it makes the visit shorter.
-
01
Which part of the cycle
Fill, wash, drain or spin. This is the most informative thing you can tell us.
-
02
Run the fold of the door gasket with a cloth
All the way round. You will find things in there.
-
03
Look at the fill hoses
Bulges, rust at the couplings, or a date more than five years old.
-
04
Check the detergent dose
Against what the machine asks for rather than what the bottle suggests.
How it shows up
What people describe when they call
A shortcut
Narrow it down before anybody arrives
A description of the behaviour leaves a few possible causes. A code names the subsystem before anybody opens anything, which is why it is worth photographing before it clears.
If there is no code at all
11014112300
11020972992
11024852300
11026002012
11026914690
11071610100
11084390300
11092180310
79640021900
79640272900
79641272210
79641283311
On a washer or dryer, the data plate is inside the door opening. All models
In more detail
About Kenmore washer leaking
Turn the water off at the faucets
A machine that keeps taking water while it is switched off, or one that has shown an overflow code, needs both faucets behind it closed before anything else happens. A valve that will not seat does not recover on its own, and replacing a laundry room floor costs many times what the valve does.
What it usually means, by the company that built it
Kenmore manufactures nothing, so the same behavior points at different things depending on who made the appliance. The three digits before the period on the rating plate are what tells them apart.
- 110 Whirlpool — Overflow shows as F8 E3 — too much water or too much foam. Whirlpool also flags reversed inlet hoses as HC, which is worth knowing after any installation.
- 796 LG — LG publishes FE, OVERFLOW ERROR, and AE for a leak detected inside the appliance. On a front-loader the door gasket fold is where lint and small items collect and where weeping starts long before anything tears visibly.
Why we look at the fill hoses even when they are not the leak
Because a fill hose is under mains pressure every hour of every day, and when one lets go it does not drip. It is thirty seconds to look at them while we are behind the machine and it is the cheapest insurance in the house.
The gasket, humidity and a closed door
A front-loader in a warm humid house, with the door shut on a wet seal after every load, ages its gasket faster than the same machine in a dry climate. The habit that prevents it is free: leave the door ajar and wipe the fold occasionally. The repair that follows ignoring it is not free.
This article is based on:
- Official manufacturer documentation
- Internal repair procedures
- Technician repair history
- Company quality standards
Before you book
Questions about Kenmore washer leaking
It only leaks on spin.
That points at the drain path or at the tub seal rather than at the fill side, and it narrows the visit usefully.
Could it be the floor rather than the machine?
It can. A washer that is not level walks, and a machine that has moved can pull on a hose or sit on its own drain. We check that before assuming a part.
Where we do it
Across Miami-Dade, Broward, and Palm Beach
Same terms everywhere we go: an on-site diagnostic first, the price agreed in writing, and the exact figure confirmed once we have seen the unit.
Neighborhoods people ask for by name